Features:
This Portable Hot Air Composite Curing System fills an
important gap in composite repair techniques by applying heat
to difficult shapes or hard to reach areas. Primary
applications are composite repairs, secondary bonding, and
modifications to composite structures. Powered and
controlled by a Hot Bonder, it can be effectively used in
place
of standard silicone rubber heat blankets. More importantly,
it provides even heating of contoured surfaces where a heat
blanket cannot be used.
A typical procedure involves vacuum bagging the repair area
and placing thermocouples in strategic locations. A second
bag, or the supplied insulation shroud, is applied to make
a
tent which fills with hot air. To provide consistent temperature,
hot air enters the tent through a controllable diffuser and
may
be recirculated by way of a return hose. The system is easy
to set up and operate and includes the hot air generator as
well as high temperature hoses, an air diffuser and insulation
shrouds. It will heat an approximate surface area of up to
24”
x 24” at 250°F with ease. Depending on the application
and
techniques used, it is capable of heating a larger area at
higher temperatures.
Applications are constantly evolving. |
-
Size: 22” x 8” x 6.5”
(559mm x 203mm x 165mm)
-
Weight: 9 lbs. (4Kg)
-
Safety: Internal High Limit
-
Plant Air: 80 psi / 4 CFM
HCS2041-01-100
Specifications:
HSC2041-02-100
Specifications:
|
